Drive Specifications | Power Consumption Specification | ||
Loader Specifications | Environment Specifications | ||
Reliability Specifications | Electrical Specifications | ||
Physical Specifications |
This section contains specification information about
the PowerVault 120T DLT1 and the DLT1 drive.
Type: | Dell PowerVault 120T DLT1 with DLT1 drive (Benchmark® Tape System model DLT1) |
Data Capacity:
(compressed mode) |
Up to 80 GB per 1800 ft cartridge |
Data Transfer Rate:
(compressed mode) |
6.0 MB/sec. sustained (360 MB/min.) |
Table 2. Loader Specifications
Media type: | DLT ½-inch, metal-particle cartridges |
Capacity: | Up to 560 GB |
Cartridge Change: | 10 seconds maximum |
Indicators/Controls: | 4 button keypad with LCD menu display, Power button, Power LED, Activity LED and Alarm LED to monitor and control system status, diagnostics and configuration |
Interface: | Dell PowerVault 120T DLT1 with DLT1 drive -- SCSI-2, Fast/Wide, low voltage DIFF/SE, 68-pin HD |
Table 3. Reliability Specifications
Maintenance: | Drive head cleaning with DLT1 cleaning cartridge when indicated by drive, or automatic with Autoclean enabled. |
MSBF: | Greater than 250,000 cartridge changes (net, drive and media) with scheduled maintenance. |
MTBF: | More than 80,000 power-on hours |
MTTR: | Within 30 minutes |
Table 4. Physical Specifications
Dimensions: | 9.25" (w) x 23.25" (d) x 7.5" (h) |
Weight: | 26.5 lb. |
Shipping Weight: | 37 LB |
Table 5. Power Consumption
Specifications
Power: | Less than 85 Watts |
Table 6. Environment
Specifications
Temperature: | 10° C to 40° C (Operating) |
Humidity: | 5% to 80% RH, non-condensing (Operating)
90% maximum (Storage/Shipping) |
Vibration: | 0.3 g (5 - 500 Hz), Operating Tested per ISTA for storage/shipping |
Shock: | 3 g Operating Impact tested per ISTA for storage/shipping |
Table 7. FS-DLT1 Electrical
Specifications
Electrical: | 100 - 240V~, 1.2 - 0.6A, 50/60 Hz |