Back
to Contents Page
Safety: Dell™ PowerVault™ 120T DLT1 Autoloader User's
Guide
Safety Warnings
Prior to operating this product, read all safety and
operating instructions. Retain this information for future reference. This
unit has been engineered and manufactured to assure the personal safety
of the user. Improper use can result in potential electrical shock or fire
hazards. To retain all safeguards, observe the following basic rules for
its installation, use and servicing.
-
Warnings - Adhere to all warnings on the product and
in the operating instructions.
-
Instructions - Follow all operating instructions and
procedures.
-
Ventilation - Position the product so proper ventilation
is maintained.
-
Heat - The product should be situated away from heat
sources such as radiators, heat registers, furnaces, or other heat producing
appliances.
-
Power Sources - Connect the product to the appropriate
power source as directed by the operating instructions or as indicated
on the product.
-
Power Cord Protection - The AC line cord must lie flat.
Avoid all situations causing the cord to be pinched, walked on, or under
other objects. Pay attention to the cord at the wall receptacle and the
exit point from the product.
-
Object and Liquid Entry - Keep objects and liquids away
from the product at all times. Avoid dropping objects on or spilling objects
into the enclosure.
-
Servicing - All servicing necessary beyond the guidelines
of the operating instructions should be referred to qualified service personnel.
Precautions
-
Do not use oil, solvents, gasoline, paint thinners or
insecticides on the unit.
-
Do not expose the unit to moisture, to temperatures
higher than 140ºF (60ºC) or to extreme low temperatures.
-
Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust and humidity, and electronic/electrical equipment
generating electrical noise.
-
Hold the AC power plug by the head when removing it
from the AC source outlet. Pulling on the cord can damage the internal
wires.
-
Use the unit on a firm level surface, free from vibration.
Do not place objects on top of unit.
Back
to Contents Page
